Curcuminoid-Mediated Antimicrobial Photodynamic Therapy on a Murine Model of Oral Candidiasis.

Antimicrobial Photodynamic Therapy (aPDT) has been extensively investigated in vitro, and preclinical animal models of infections are suitable for evaluating alternative treatments prior to clinical trials. This study describes the efficacy of aPDT in a murine model of oral candidiasis. Forty mice were immunosuppressed with subcutaneous injections of prednisolone, and their tongues were inoculated using an oral swab previously soaked in a C. albicans cell suspension. Tetracycline was administered via drinking water during the course of the experiment. Five days after fungal inoculation, mice were randomly distributed into eight groups; a ninth group of untreated uninfected mice was included as a negative control (n = 5). Three concentrations (20 µM, 40 µM, and 80 µM) of a mixture of curcuminoids were tested with a blue LED light (89.2 mW/cm2; ~455 nm) and without light (C+L+ and C+L- groups, respectively). Light alone (C-L+), no treatment (C-L-), and animals without infection were evaluated as controls. Data were analyzed using Welch's ANOVA and Games-Howell tests (α = 0.05). Oral candidiasis was established in all infected animals and visualized macroscopically through the presence of characteristic white patches or pseudomembranes on the dorsum of the tongues. Histopathological sections confirmed a large presence of yeast and filaments limited to the keratinized layer of the epithelium in the C-L- group, and the presence of fungal cells was visually decreased in the images obtained from mice subjected to aPDT with either 40 µM or 80 µM curcuminoids. aPDT mediated by 80 µM curcuminoids promoted a 2.47 log10 reduction in colony counts in comparison to those in the C-L- group (p = 0.008). All other groups showed no statistically significant reduction in the number of colonies, including photosensitizer (C+L-) or light alone (C-L+) groups. Curcuminoid-mediated aPDT reduced the fungal load from the tongues of mice.

Zerumbone Disturbs the Extracellular Matrix of Fluconazole-Resistant Candida albicans Biofilms.

This study assessed the effect of zerumbone (ZER) against fluconazole-resistant (CaR) and -susceptible Candida albicans (CaS) biofilms and verified the influence of ZER on extracellular matrix components. Initially, to determine the treatment conditions, the minimum inhibitory concentration (MIC), the minimum fungicidal concentration (MFC) and the survival curve were evaluated. Biofilms were formed for 48 h and exposed to ZER at concentrations of 128 and 256 µg/mL for 5, 10 and 20 min (n = 12). One group of biofilms did not receive the treatment in order to monitor the effects. The biofilms were evaluated to determine the microbial population (CFU/mL), and the extracellular matrix components (water-soluble polysaccharides (WSP), alkali-soluble polysaccharides (ASPs), proteins and extracellular DNA (eDNA), as well as the biomass (total and insoluble) were quantified. The MIC value of ZER for CaS was 256 µg/mL, and for CaR, it was 64 µg/mL. The survival curve and the MFC value coincided for CaS (256 µg/mL) and CaR (128 µg/mL). ZER reduced the cellular viability by 38.51% for CaS and by 36.99% for CaR. ZER at 256 µg/mL also reduced the total biomass (57%), insoluble biomass (45%), WSP (65%), proteins (18%) and eDNA (78%) of CaS biofilms. In addition, a reduction in insoluble biomass (13%), proteins (18%), WSP (65%), ASP (10%) and eDNA (23%) was also observed in the CaR biofilms. ZER was effective against fluconazole-resistant and -susceptible C. albicans biofilms and disturbed the extracellular matrix.

The Effect of Sub-Lethal Successive Applications of Photodynamic Therapy on Candida albicans Biofilm Depends on the Photosensitizer.

This study aimed to evaluate the potential of successive applications of sub-lethal doses of the antimicrobial photodynamic therapy (aPDT) mediated by Photodithazine® (PDZ) and curcumin (CUR) associated with LED in the viability, reactive oxygen species (ROS) production, and gene expression of Candida albicans. The microbial assays were performed using planktonic cultures and biofilms. Ten successive applications (Apl#) were performed: aPDT (P+L+; C+L+), photosensitizer (P+L-; C+L-), and LED (P-L+; C-L+). Control groups were used (P-L-; C-L-). The viability of C. albicans was determined by cultivating treated cultures on agar plates with or without fluconazole (FLU). In addition, the ROS detection and expression of SOD1, CAP1, and ERG11 genes were determined. For planktonic cultures, no viable colonies were observed after Apl#3 (without FLU) and Apl#2 (with FLU) for either photosensitizer. Biofilm treated with P+L+ resulted in the absence of cell viability after Apl#7, while C+L+ showed ~1.40 log10 increase in cell viability after Apl#2, regardless of FLU. For both photosensitizers, after the last application with viable colonies, the production of ROS was higher in the biofilms than in the planktonic cultures, and SOD1 expression was the highest in P+L+. A reduction of CAP1 and ERG11 expression occurred after P+L+, regardless of FLU. C+L+ had a higher level of ROS, and the treatments were non-significant for gene expression. Sub-lethal doses of aPDT mediated by CUR could induce C. albicans resistance in biofilms, while C. albicans cells in biofilms were susceptible to aPDT mediated by PDZ.

The biological effects of different LED wavelengths in the health field. A review / Os efeitos biológicos de diferentes comprimentos de onda de LED na área da saúde. Uma revisão

Introduction: the use of light emitting diodes (LED) in domestic and public vias have increased in the last 20 years. In addition, the LED light has been used as a light source for medical applications. Objective: since humans are increasingly exposed to LEDs, there is an urgency to investigate the possible biological effects on tissues caused by this exposure. So, researchers have been focused their investigations in the application of this light in the health field. Material and method: in this review, a search in important databases was performed on the biological effects caused after application of different LED light protocols in in vitro and in vivo studies. Result: although most published papers have shown positive results, some of them reported negative biological effects of light LEDs technology on humans' cells/tissues. Conclusion: therefore, the comprehension of the biological effects caused by light LEDs will provide a better assessment of the risks involved using this technology.

Introdução: o uso de diodos emissores de luz ("LED") em vias domésticas e públicas tem aumentado nos últimos 20 anos. Além disso, a luz LED tem sido usada para aplicações médicas. Objetivo: pelo fato de seres humanos estarem cada vez mais expostos aos LEDs, há urgência em investigar os possíveis efeitos biológicos nos tecidos causados por esta exposição. Assim, pesquisadores têm focado suas investigações no uso desta luz na área da saúde. Material e método: nesta revisão foi realizada uma pesquisa em bancos de dados conceituados sobre os efeitos biológicos causados após aplicação de diferentes protocolos de luz LED em estudos in vitro e in vivo. Resultado: embora a maioria dos artigos publicados tenham mostrado resultados positivos, alguns deles relataram efeitos biológicos negativos da tecnologia de LEDs nas células/tecidos humanos. Conclusão: portanto, a compreensão dos efeitos biológicos causados pela luz LED proporcionará uma melhor avaliação dos riscos envolvidos no uso desta tecnologia.

Efficacy of curcumin-mediated antibacterial photodynamic therapy for oral antisepsis: A systematic review and network meta-analysis of randomized clinical trials.

BACKGROUND: The presence of oral microorganisms resistant to traditional treatment is increasing, thus a search for new therapies is needed. In this context, antimicrobial photodynamic therapy (aPDT) is an approach for the treatment of antibiotic resistant andnon resistant microorganisms. Therefore, the aim of the present study was to conduct a systematic review and meta-analysis of randomized clinical trials of aPDT for oral antisepsis against oral polymicrobial biofilms. METHODS: PubMed, Science Direct, Scopus, SciELO, Lilacs, Cochrane Library and Embase databases were searched. In total, five articles were included for qualitative analysis and four articles were used for quantitative analyses. Bias assessment of the eligible articles was made using the RoB 2 criteria. Network meta-analysis was performed using the random-effect model. Subgroup's analysis was also conducted. The groups evaluated were aPDT, exposure to light only and no treatment at all (control group). The quality of evidence was assessed by CINeMA approach. RESULTS: aPDT mediated by curcumin had significant results in the reducing bacterial load (0.31-0.49 log10 UFC/ I2=0%) when compared with the control group. The included articles were classified as low risk of bias, despite biases detected by allocation and blinding. Moreover, quantitative analysis between aPDT and control group and between light and control group were classified with low risk of confidence rating, while the results from aPDT versus light were classified as moderate risk of confidence rating. CONCLUSION: aPDT has significant efficacy for oral antisepsis, however more randomized clinical trials will be needed to validate the present results.

Antimicrobial photodynamic therapy reduces gene expression of Candida albicans in biofilms.

The present study evaluated whether the oxidative stress caused by antimicrobial photodynamic therapy (aPDT) affects the expression of C. albicans genes related to adhesion and biofilm formation (ALS1 and HPW1) and oxidative stress response (CAP1, CAT1, and SOD1). The aPDT was mediated by two photosensitizing agents (PSs) Photodithazine® (PDZ at 100 and 200 mg/L) or Curcumin (CUR at 40 and 80 µM) and LED (37.5 J/cm2 or 50 J/cm2). The quantification of the expression was performed by Reverse Transcription-Quantitative Polymerase Chain Reaction (RT-qPCR) using specific primers for the target genes. The data were analyzed by Analysis of Variance (α = 0.05), followed by Tukey's post-test. It was observed reduction in the expression of ALS1, HWP1, CAP1, CAT1, and SOD1 when aPDT was performed using 200 mg/L PDZ and 80 µM CUR associated to LED (37.7 and 50 J/cm2, respectively) and using 100 mg/L PDZ and 40 µM CUR with LED of 50 J/cm2 (versus control). Also, the expression of CAP1 and SOD1 genes was reduced after aPDT using 100 mg/L PDZ and LED of 37.5 J/cm2. There was a significant reduction in the expression of genes HWP1, CAP1, and SOD1 after aPDT using 40 µM CUR and 37.5 J/cm2 (versus the control group). The application of LED only at 37.5 and 50 J/cm2 promoted down-regulation of ALS1, CAP1, CAT1, and SOD1 genes (versus the control group). Therefore, aPDT mediated by LED -associated PSs PDZ and CUR promoted a reduction in the expression of the five C. albicans genes evaluated.

Antimicrobial photodynamic therapy effectiveness against susceptible and methicillin-resistant Staphylococcus aureus biofilms.

BACKGROUND: Staphylococcus aureus have a great ability to become rapidly resistant to conventional antimicrobial therapies. This study evaluated the efficacy of antimicrobial photodynamic therapy (aPDT) mediated by Curcumin (Cur) and light-emitting diode (LED) in the inactivation of biofilms of methicillin susceptible and resistant S. aureus (MSSA and MRSA, respectively). METHODS: Biofilms were treated with Cur (20, 40 or 80 µM) and illuminated with LED source (455 ± 3 nm; 5.28 J/cm2) (aPDT groups), or treated either with Cur or LED only. Other samples were not exposed to Cur or LED (negative control). The biofilms viability after all experimental conditions were evaluated by counting the number of colonies (CFU/mL) and XTT assay. Additional samples were also evaluated by LIVE/DEAD® staining using confocal laser scanning microscopy (CLSM). Data were analyzed by ANOVAs followed by the Games-Howell post hoc test (α = 0.05). RESULTS: For both strains, all aPDT groups significantly reduced both CFU/mL and metabolic activity of biofilms compared to the negative control (p < 0.001). The results were enhanced when 80 µM of Cur was used. CLSM images showed that both bacteria biofilms submitted to aPDT had a large number of red-stained colonies, especially at aPDT80. In general, MRSA biofilms tended to be less susceptible to aPDT than MSSA biofilms. CONCLUSIONS: It can be concluded that aPDT mediated by Cur and LED was an efficient method to inactivate 48 -h biofilms of both S. aureus strains.

Antimicrobial photodynamic therapy alone or in combination with antibiotic local administration against biofilms of Fusobacterium nucleatum and Porphyromonas gingivalis.

Antimicrobial photodynamic therapy (aPDT) kills several planktonic pathogens. However, the susceptibility of biofilm-derived anaerobic bacteria to aPDT is poorly characterized. Here, we evaluated the effect of Photodithazine (PDZ)-mediated aPDT on Fusobacterium nucleatum and Porphyromonas gingivalis biofilms. In addition, aPDT was tested with metronidazole (MTZ) to explore the potential antimicrobial effect of the treatment. The minimum inhibitory concentration (MIC) of MTZ was defined for each bacterial species. Single-species biofilms of each species were grown on polystyrene plates under anaerobic conditions for five days. aPDT was performed by applying PDZ at concentrations of 50, 75 and 100 mg/L, followed by exposure to 50 J/cm2 LED light (660 nm) with or without MTZ. aPDT exhibited a significant reduction in bacterial viability at a PDZ concentration of 100 mg/L, with 1.12 log10 and 2.66 log10 reductions for F. nucleatum and P. gingivalis in biofilms, respectively. However, the antimicrobial effect against F. nucleatum was achieved only when aPDT was combined with MTZ at 100× MIC. Regarding P. gingivalis, the combination of PDZ-mediated aPDT at 100 mg/L with MTZ 100× MIC resulted in a 5 log10 reduction in the bacterial population. The potential antimicrobial effects of aPDT in combination with MTZ for both single pathogenic biofilms were confirmed by live/dead staining. These results suggest that localized antibiotic administration may be an adjuvant to aPDT to control F. nucleatum and P. gingivalis biofilms.

Antimicrobial Photodynamic Therapy Mediated by Curcumin-Loaded Polymeric Nanoparticles in a Murine Model of Oral Candidiasis.

Antimicrobial photodynamic therapy (aPDT) has been proposed as an alternative method for oral candidiasis (OC), while nanocarriers have been used to improve the water solubility of curcumin (CUR). The aim of this study is to encapsulate CUR in polymeric nanoparticles (NPs) and to evaluate its photodynamic effects on a murine model of OC. Anionic and cationic CUR-NP is synthesized using poly-lactic acid and dextran sulfate and then characterized. Female mice are immunosuppressed and inoculated with Candida albicans (Ca) to induce OC. aPDT is performed by applying CUR-NP or free CUR on the dorsum of the tongue, followed by blue light irradiation for five consecutive days. Nystatin is used as positive control. Afterward, Ca are recovered and cultivated. Animals are euthanized for histological, immunohistochemical, and DNA damage evaluation. Encapsulation in NP improves the water solubility of CUR. Nystatin shows the highest reduction of Ca, followed by aPDT mediated by free CUR, which results in immunolabelling of cytokeratins closer to those observed for healthy animals. Anionic CUR-NP does not show antifungal effect, and cationic CUR-NP reduces Ca even in the absence of light. DNA damage is associated with Ca infection. Consecutive aPDT application is a safe treatment for OC.

Curcumin-mediated anti-microbial photodynamic therapy against Candida dubliniensis biofilms.

The purpose of this study was to evaluate the effectiveness of anti-microbial photodynamic therapy (aPDT) mediated by curcumin (Cur) associated with LED light against biofilms of Candida dubliniensis, and further, investigate cellular uptake and drug penetration through the biofilms under confocal laser scanning microscopy (CLSM). Four C. dubliniensis strains were tested: three clinical isolates from HIV-positive patients and one reference strain (CBS 7987). Biofilms were treated with three Cur concentrations (20.0, 30.0, and 40.0 µM). All samples were incubated in the dark for 20 min and exposed to a 5.28 J/cm2 of LED light fluence. Additional samples of each strain were treated either with Cur or LED light only. Control samples had neither Cur nor light. After aPDT, results were read using the XTT salt reduction method. The data were statistically analyzed by two-way ANOVA followed by Games-Howell post-hoc test (α = 0.05). Confocal laser scanning microscopy was used to verify both the uptake of Cur by yeast cells and its penetration through the biofilm. The results showed that aPDT promoted significant reduction on the metabolism of the biofilm-organized cells of C. dubliniensis. Further, while Cur was rapidly taken up by C. dubliniensis cells, a longer time interval was required to allow Cur penetration into biofilm cells. Based on these results, aPDT associating LED and Cur presents promising potential on fungal control of biofilms of C. dubliniensis.

Encapsulation of curcumin in polymeric nanoparticles for antimicrobial Photodynamic Therapy.

Curcumin (CUR) has been used as photosensitizer in antimicrobial Photodynamic Therapy (aPDT). However its poor water solubility, instability, and scarce bioavalibility hinder its in vivo application. The aim of this study was to synthesize curcumin in polymeric nanoparticles (NP) and to evaluate their antimicrobial photodynamic effect and cytoxicity. CUR in anionic and cationic NP was synthesized using polylactic acid and dextran sulfate by the nanoprecipitation method. For cationic NP, cetyltrimethylammonium bromide was added. CUR-NP were characterized by physicochemical properties, photodegradation, encapsulation efficiency and release of curcumin from nanoparticles. CUR-NP was compared with free CUR in 10% dimethyl sulfoxide (DMSO) as a photosensitizer for aPDT against planktonic and biofilms (mono-, dual- and triple-species) cultures of Streptococcus mutans, Candida albicans and Methicillin-Resistant Staphylococcus aureus. The cytotoxicity effect of formulations was evaluated on keratinocytes. Data were analysed by parametric (ANOVA) and non-parametric (Kruskal-Wallis) tests (α = 0.05). CUR-NP showed alteration in the physicochemical properties along time, photodegradation similar to free curcumin, encapsulation efficiency up to 67%, and 96% of release after 48h. After aPDT planktonic cultures showed reductions from 0.78 log10 to complete eradication, while biofilms showed no antimicrobial effect or reductions up to 4.44 log10. Anionic CUR-NP showed reduced photoinactivation of biofilms. Cationic CUR-NP showed microbicidal effect even in absence of light. Anionic formulations showed no cytotoxic effect compared with free CUR and cationic CUR-NP and NP. The synthesized formulations improved the water solubility of CUR, showed higher antimicrobial photodynamic effect for planktonic cultures than for biofilms, and the encapsulation of CUR in anionic NP reduced the cytotoxicity of 10% DMSO used for free CUR.

Virulence factors of fluconazole-susceptible and fluconazole-resistant Candida albicans after antimicrobial photodynamic therapy.

This study evaluated the effects of antimicrobial photodynamic therapy (aPDT) mediated by Photodithazine® (PDZ) and LED light on the virulence factors of fluconazole-susceptible (CaS) and fluconazole-resistant (CaR) Candida albicans. Standardized suspensions of strains were prepared (107), and after 48 h of biofilm formation, these strains were incubated with PDZ (100 mg/L) for 20 min and exposed to LED light (660 nm, 37.5 J/cm2). Additional samples were treated with PDZ or light only, and the control consisted of biofilms that received no treatment. After aPDT, the cells were recovered and the virulence factors were evaluated. To analyze the capacity of adhesion, cells were recovered after aPDT and submitted to the adhesion process in the bottom of a 96-well plate. After this, metabolic activity tests (XTT assay) and cell viability (colony forming units per milliliter, CFU/mL) were applied. To evaluate the biofilm-forming ability after aPDT, the cells recovered were submitted to biofilm formation procedures, and the biofilm formed was evaluated by XTT, CFU/mL, and total biomass (crystal violet) tests. Lastly, the capacity for synthesizing protease and phospholipase enzymes after aPDT was evaluated by fluorimetric tests. Data were analyzed by two- or three-way ANOVA tests (p ≤ 0.05). It was verified that aPDT reduced the viability of both strains, fluconazole-susceptible and fluconazole-resistant C. albicans. It was also observed that the CaR strain had lower susceptibility to the aPDT when compared with the CaS strain. However, regarding the virulence factors evaluated, it was demonstrated that aPDT did not alter the adherence and biofilm formation ability and enzymatic production.

Genotoxic effect of photodynamic therapy mediated by curcumin on Candida albicans.

Photodynamic therapy (PDT) is a promising method for localized and specific inactivation of fungi and bacteria. A nontoxic light-sensitive compound is taken up by cells, which are then exposed selectively to light, which activates toxicity of the compound. We investigated the potential of sublethal PDT using light-sensitive curcumin (CUR) in combination with blue (455 nm) light to promote reactive oxygen species (ROS) formation in the form of singlet oxygen and DNA damage of Candida albicans. Surprisingly, CUR-mediated PDT but also light alone caused significantly longer comet tails, an indication of DNA damage of C. albicans when compared with the negative control. The intracellular ROS production was also significantly higher for the group treated only with light. However, PDT compared to blue light alone significantly slowed DNA repair. Comet tails decreased during 30 min visualized as a 90% reduction in length in the absence of light for cells treated with light alone, while comet tails of cells treated with PDT only diminished in size about 45%. These results indicate that complex mechanisms may result in PDT in a way that should be considered when choosing the photosensitive compound and other aspects of the treatment design.

Susceptibility of multispecies biofilm to photodynamic therapy using Photodithazine®.

This in vitro study evaluated the effect of photodynamic therapy (PDT) on the multispecies biofilm of Candida albicans, Candida glabrata, and Streptococcus mutans. Standardized fungal and bacterial suspensions were cultivated appropriately for each species and inoculated in 96-well microtiter plates for mix-biofilm formation. After 48 h of incubation, the biofilms were submitted to PDT (P + L+) using Photodithazine® (PDZ) at 100, 150, 175, 200, or 250 mg/mL for 20 min and 37.5 J/cm(2) of light-emitting diode (LED) (660 nm). Additional samples were treated only with PDZ (P + L-) or LED (P-L+), or neither (control, P-L-). Afterwards, the biofilms were evaluated by quantification of colonies (CFU/mL), metabolic activity (XTT reduction assay), total biomass (crystal violet staining), and confocal scanning laser microscopy (CSLM). Data were analyzed by one-way ANOVA and Tukey tests (p < 0.05). Compared with the control, PDT promoted a significant reduction in colonies viability of the three species evaluated with 175 and 200 mg/mL of PDZ. PDT also significantly reduced the metabolic activity of the biofilms compared with the control, despite the PDZ concentration. However, no significant difference was found in the total biomass of samples submitted or not to PDT. For all analysis, no significant difference was verified among P-L-, P + L-, and P-L+. CSLM showed a visual increase of dead cells after PDT. PDT-mediated PDZ was effective in reducing the cell viability of multispecies biofilm.

Effect of different pre-irradiation times on curcumin-mediated photodynamic therapy against planktonic cultures and biofilms of Candida spp.

OBJECTIVES: The aim of this study was to evaluate the effects of pre-irradiation time (PIT) on curcumin (Cur)-mediated photodynamic therapy (PDT) against planktonic and biofilm cultures of reference strains of Candida albicans, Candida glabrata and Candida dubliniensis. MATERIALS AND METHODS: Suspensions and biofilms of Candida species were maintained in contact with different concentrations of Cur for time intervals of 1, 5, 10 and 20min before irradiation and LED (light emitting diode) activation. Additional samples were treated only with Cur, without illumination, or only with light, without Cur. Control samples received neither light nor Cur. After PDT, suspensions were plated on Sabouraud Dextrose Agar, while biofilm results were obtained using the XTT-salt reduction method. Confocal Laser Scanning Microscopy (CLSM) observations were performed to supply a better understanding of Cur penetration through the biofilms after 5 and 20min of contact with the cultures. RESULTS: Different PITs showed no statistical differences in Cur-mediated PDT of Candida spp. cell suspensions. There was complete inactivation of the three Candida species with the association of 20.0µM Cur after 5, 10 and 20min of PIT. Biofilm cultures showed significant reduction in cell viability after PDT. In general, the three Candida species evaluated in this study suffered higher reductions in cell viability with the association of 40.0µM Cur and 20min of PIT. Additionally, CLSM observations showed different intensities of fluorescence emissions after 5 and 20min of incubation. CONCLUSION: Photoinactivation of planktonic cultures was not PIT-dependent. PIT-dependence of the biofilm cultures differed among the species evaluated. Also, CLSM observations confirmed the need of higher time intervals for the Cur to penetrate biofilm structures.

Phototoxic effect of curcumin on methicillin-resistant Staphylococcus aureus and L929 fibroblasts.

Photodynamic therapy has been investigated as an alternative method of killing pathogens in response to the multiantibiotic resistance problem. This study evaluated the photodynamic effect of curcumin on methicillin-resistant Staphylococcus aureus (MRSA) compared to susceptible S. aureus (MSSA) and L929 fibroblasts. Suspensions of MSSA and MRSA were treated with different concentrations of curcumin and exposed to light-emitting diode (LED). Serial dilutions were obtained from each sample, and colony counts were quantified. For fibroblasts, the cell viability subsequent to the curcumin-mediated photodynamic therapy was evaluated using the MTT assay and morphological changes were assessed by SEM analysis. Curcumin concentrations ranging from 5.0 to 20.0 µM in combination with any tested LED fluences resulted in photokilling of MSSA. However, only the 20.0 µM concentration in combination with highest fluence resulted in photokilling of MRSA. This combination also promoted an 80% reduction in fibroblast cell metabolism and morphological changes were present, indicating that cell membrane was the main target of this phototherapy. The combination of curcumin with LED light caused photokilling of both S. aureus strains and may represent an alternative treatment for eradicating MRSA, responsible for significantly higher morbidity and mortality and increased healthcare costs in institutions and hospitals.

Surface roughness of denture base and reline materials after disinfection by immersion in chlorhexidine or microwave irradiation.

BACKGROUND: This study evaluated the effect of disinfection by immersion and microwave irradiation on the roughness of one denture base resin (Lucitone-L) and five relining materials, three hard (Tokuyama Rebase II-TR, New Truliner-NT, Ufigel Hard-UH) and two resilient (Trusoft-T, Sofreliner-S). METHODS: Fifty specimens were made and divided into groups: CL2 specimens were brushed with 4% chlorhexidine (1 min), immersed in the same solution (10 min) and immersed in water (3 min); MW2 specimens were immersed in water and microwave irradiated (650W; 6 min); CL2 and MW2 specimens were disinfected twice; CL7 and MW7 specimens were submitted to seven cycles using chlorhexidine or microwave irradiation, respectively; W specimens were not disinfected and remained in water (37°C; 7 days). RESULTS: Results were statistically analysed (p = 0.05) and revealed that, at baseline, the highest mean value was observed for T (p < 0.001). Material NT showed increase in roughness after the first (p = 0.003), second (p = 0.001), seventh (p = 0.000) cycles of microwave disinfection and after 7 days of immersion in water (p = 0.033). CONCLUSIONS: Resilient liner S presented significant increase in roughness after the second cycle of disinfection with chlorhexidine (p = 0.003). Material T exhibited significantly decreased roughness in group W (p = 0.010), while microwaving produced severe alterations on its surface.

Color stability of chemically activated reline resin after microwave disinfection: a 1-year clinical trial.

PURPOSE: To evaluate the effect of microwave disinfection on the color stability of a hard chairside reline resin after a 1-year service period. METHODS: 40 adult patients aged between 30-75 years, who required denture reline treatment, participated in this study. Tokuyama Rebase II was used to reline complete maxillary dentures. The edentulous subjects were randomly divided into two groups (n=20) and dentures were cleansed according to two methods: CG (control group) - brushing with coconut soap and soft toothbrush; DG (disinfection group) - brushing according to previous methods and microwave disinfection once a week for 3 minutes at 650W. Color parameters in L*a*b* were recorded by spectrophotometer immediately after the reline, at 7 and 15 days, 1, 3, 6 and 9 months and 1 year post-placement. Data were analyzed by two-way repeated-measures ANOVA and Tukey tests (alpha = 0.05). RESULTS: Color alteration values of DG were significantly lower than those of CG (P<0.05). Color changes observed after 15 days were greater than values obtained at 7 days recall (P<0.05). All color changes observed for the CG were considered noticeable (between 1.5 and 3.0 NBS). In DG, color change was slight (between 0.5 and 1.5 NBS). There were statistically significant differences between L* values obtained initially and after 3 months, between 15 days and 3 months and between 15 days and 1 year (P<0.05). No significant differences were observed between group and time for the parameters a* and b*.

Fungicidal effect of photodynamic therapy against fluconazole-resistant Candida albicans and Candida glabrata.

Although photodynamic therapy (PDT) has shown great promise for the inactivation of Candida species, its effectiveness against azole-resistant pathogens remains poorly documented. This in vitro study describes the association of Photogem® (Photogem, Moscow, Russia) with LED (light emitting diode) light for the photoinactivation of fluconazole-resistant (FR) and American Type Culture Collection (ATCC) strains of Candida albicans and Candida glabrata. Suspensions of each Candida strain were treated with five Photogem® concentrations and exposed to four LED light fluences (14, 24, 34 or 50 min of illumination). After incubation (48 h at 37 °C), colonies were counted (CFU ml(-1)). Single-species biofilms were generated on cellulose membrane filters, treated with 25.0 mg l(-1) of Photogem® and illuminated at 37.5 J cm(-2). The biofilms were then disrupted and the viable yeast cells present were determined. Planktonic suspensions of FR strains were effectively killed after PDT. It was observed that the fungicidal effect of PDT was strain-dependent. Significant decreases in biofilm viability were observed for three strains of C. albicans and for two strains of C. glabrata. The results of this investigation demonstrated that although PDT was effective against Candida species, fluconazole-resistant strains showed reduced sensitivity to PDT. Moreover, single-species biofilms were less susceptible to PDT than their planktonic counterparts.

Adhesive bonding of resin composite to various Ni-Cr alloy surfaces using different metal conditioners and a surface modification system.

PURPOSE: This study evaluated the effect of three metal conditioners [Metal Photo Primer (MPP), Cesead II Opaque Primer (OP), Targis Link (TL)], and one surface modification system [Siloc (S)] on the shear bond strength (SBS) of a prosthetic composite material to Ni-Cr alloy. MATERIALS AND METHODS: Rivet-shaped specimens were cast, and three surface treatments were evaluated: Polishing (P); sandblasting with either 50 microm (50SB) or 250 microm (250SB) Al(2)O(3). All products were applied to half of the specimens, while the other half remained without the materials. Veneering resin composite (8-mm diameter, 2-mm thick) was applied and light-exposed for 90 seconds in a laboratory light-curing unit. The specimens were stored in water at 37 degrees C for 24 hours, and half were subjected to 500 thermal cycles consisting of water baths at 4 degrees C and 60 degrees C. All specimens were submitted to SBS test (0.5 mm/min) until failure. Failure patterns were determined using optical and scanning electron microscope (SEM) analysis. Data were analyzed by ANOVA and post hoc Tukey's test (preset alpha of 5%). RESULTS: The SBS values of OP and TL groups were higher than those of MPP and S within the 50SB treatment (p < 0.05). No significant difference in SBS was noted between OP and TL as well as between MPP and S. On the other hand, no significant differences were found among conditioners within the 250SB group (p > 0.05). The SBS values of MPP, OP, and S from the 250SB group were higher than those from 50SB (p < 0.05). No significant difference in SBS was noted among most groups with conditioners after thermocycling. The only exception was observed for MPP, which showed an increase in SBS after thermocycling (p < 0.05). Differences in SBS were noted among the groups with conditioners (p < 0.05), and no significant difference in SBS was noted between TL and OP groups, which showed the highest values among all within the P group. No significant difference was noted between MPP and S. Debonded surfaces showed adhesive failures predominantly located between metal surface and opaque resin. CONCLUSIONS: The OP and TL conditioners and surface sandblasting with 250 microm Al(2)O(3) promoted the highest SBS between resin and the Ni-Cr metal surface.